鉄道建設・運輸施設整備支援機構による調達物品の仕様書制定に関する資料提供招請
令和7年12月12日|p.61
左の本文を選ぶと、右側の官報原文画像で該当箇所を照合できます。
招請
資料提供招請に関する公表
91号 19
次のとおり調達物品の仕様書制定を予定してい
ますので、当該物品に関して資料等の提供を招請
します。
令和7年12月12日
独立行政法人
鉄道建設・運輸施設整備支援機構
契約担当役
鉄道技術センター長渡邉修
◎調達機関番号565◎所在地番号13
1調達内容
(1)品目分類番号18
(2)物品及び数量
①スラプ軌道作業車(モルタル注入車)
1式程度
②スラブ軌道作業車(スラブ運搬敷設車)
1組程度
(3)調達方法購入等
(4)調達予定時期
①令和8年度以降
②令和8年度以降
(5)調達に必要とされる基本的な要求要件
①スラブ軌道作業車(モルタル注入車)
A鉄道建設におけるスラブ軌道工事の際
に、軌道上にてセメントアスファルトモ
ルタル(以下「CAモルタル」という。)
の製造及び注入作業を可能にする移動式
のバッチャプラントとする。
B軌間1,435mmの軌道上を走行でき、軌
道モータカー等でけん引及び推進できる
構造であること。
CCAモルタルの主な材料は、セメント、
アスファルト乳剤、細骨材、混和材、水、
各種添加剤である。これらを積載できる
LO
②スラブ軌道作業車(スラブ運搬敷設車)
Aレール中心間距離2,960mの軌道上を
走行でき、自走できる構造であること。
Bスラブの最大寸法は、長さ4.900mm、
幅2,220mm、厚さ295mm、最大重量は6.7t
とする。
C1編成でスラブ5枚が運搬・敷設可能
なこと。
2資料及びコメントの提供方法
上記1(2)の物品に関する一般的な参考資料及
び同(5)の要求要件等に関するコメント並びに提
供可能な資料等の提供を招請する。
(1)資料等の提出期限令和8年2月20日16時
(郵送の場合は必着のこと。)
(2)提出先105-0011東京都港区芝公園2
丁目4番1号独立行政法人鉄道建設・運輸
施設整備支援機構鉄道技術センター設備部
設備企画課機械技術グループ電話03-
5403-8749
E-mail:kikai-gijyutsu-g-k7a4@jrtt.go.jp
3説明書及び基本要件書の交付
本公表に基づき応募する供給者に対して説明
書及び基本要件書を交付する。
(1)交付期間令和7年12月12日から令和8年
2月20日まで。
(2)交付場所上記2(2)に同じ。
4説明会の開催
本公表に基づく説明会を説明書交付後別途開
催する。
(1)開催日時説明書による
(2)開催場所説明書による
(3)出席申込み令和8年1月9日16時までに
上記2(2)に申込みを行うこと。
5その他
本招請の詳細は説明書による。なお、本公表
内容は予定であり、変更することがあり得る。
6 Summary
(1)Classification of the products to be pro-
cured:18
(2)Nature and quantity of the products to be
required:
①Working car for slab track (The car
produces and injects cement-asphalt mor-
tar on the track): approximately 1 set.
② Working car for slab track (The car
carrys and lays slab on the track): ap-
proximately 1 set.
(3) Type of the procurement : purchase
(4) Basic requirements of the procurement
①Working car for slab track (The car
produces and injects cement-asphalt mor-
tar on the track)
A The car is a mobile batcher plant
that can produce and inject cement-
asphalt mortar on the track for slab
track construction.
B The car can run on standard gauge
and is towed by the motor car.
C Cement-asphalt mortar consists of
cement, asphalt-emulsion, fine aggre-
gate, admixture, water and several ad-
ditives. The car can carry them.
② Working car for slab track (The car
carrys and lays slab on the track)
A The car can run on the track (2,960mm
gauge)
B The maximum slab size is 4,900mm in
length, 2,220mm in width, 295mm in thick-
ness weight
C The car cand labs
at a time.
(5) Time-limit for the submission of the re-
quested material: 16:00 February,
2026
(6)Contact point for the notice : Equipment
and Building Planning Division, Railway
Technical Center of JRTT, 2-4-1 Shiba-
koen Minato-ku Tokyo 105—0011 Japan,
Tel03-5403-8749